Wine Store Shelving

Caliper Studio designed, detailed and fabricated the steel components for the Upper East Side Wine Store, designed by Caliper Architecture. Caliper Fabrication and Caliper Architecture managed the installation process to ensure coordination of this complex assembly.

Wine-Store-004

Photo by Scott Larsen.

wine-store-shelf-fabrication-015
wine-store-shelf-fabrication-014
wine-store-shelf-fabrication-013

Stocking the shelves.

wine-store-shelf-fabrication-011
wine-store-shelf-fabrication-005

Walnut box inserted into blackened steel shelving.

wine-store-shelf-fabrication-006
wine-store-shelf-fabrication-007

Early test of concealed LED lighting.

wine-store-shelf-fabrication-008
wine-store-shelf-fabrication-009
wine-store-shelf-fabrication-010

Installation of feature lighting in walnut display box.

wine-store-shelf-fabrication-002
wine-store-shelf-fabrication-003

The mockup was also used to test the effects of LED lighting.

wine-store-shelf-fabrication-001

A full-scale mockup was made out of corrugated cardboard to test the geometry and structural system.

wine-store-shelf-fabrication-004

Drawings produced by Caliper Studio were consulted to determine the location of each of the 182 folded steel boxes.

Photo by Scott Larsen.
IMG_4526
Photo by Scott Larsen.
Photo by Scott Larsen.
Photo by Scott Larsen.
Photo by Scott Larsen.
Photo by Scott Larsen.
Photo by Scott Larsen.
Handrail system at entrance. Photo by Scott Larsen.
steel-mesh-rail-001
steel-infill-001
Photo by Scott Larsen.
Guardrail corner and baluster detail
ViewUP